| Summary |
The document will form part of a “How to …?” series of books. The book will focus on the analysis and processing of CFD output. Its aim is to equip analysts with the understanding and techniques necessary to obtain key project data from CFD output. Part of this is to understand that the post processing starts very early in the project and that the post processing requirements may influence the grouping of surfaces or location of interior surfaces and model setup. The book should go further than merely illustrating how to post-process and visualise CFD results: it should also show how to check the output of CFD software to ensure that the results are credible and correctly reflect the intended model set-up.
The book must be illustrated by examples, ideally taken from a wide range of technology areas; such as aerospace, automotive, chemical/process, and building services, etc. There must be no bias towards any particular CFD or visualisation software and both solver integrated and third party post-processors should be mentioned.
The cost of preparing each document is expected to be in the low thousands of GB Pounds (or equivalent in Euros or US dollars as specified).
The closing date for receipt of proposals is 5th January 2010 . Authors are encouraged to register their interest earlier. |